Service
Water Filtration & Softener Installation in LA
LA tap water runs 15–25 grains of hardness — scaling your water heater, killing your dishwasher, and leaving chalk on every faucet.
- Licensed & Insured
- Family Owned Since 2015
- 24/7 Emergency Service
- 200+ Five-Star Reviews
The Metropolitan Water District delivers some of the hardest tap water in the United States to LA homes — 15 to 25 grains per gallon depending on neighborhood. Hard water isn't a health concern, but it destroys water heaters (sediment), shortens dishwasher life, scales shower heads, dulls your laundry, and leaves a chalk-white residue on everything it touches. A properly-sized whole-home softener pays for itself in 4–7 years just in extended appliance life. Add a carbon filter ahead of the softener and you also remove the chlorine, chloramines, and taste-affecting compounds that make LA tap taste like a swimming pool.
What's Included
Water Hardness Testing
We test your home's actual hardness, iron content, pH, and chlorine level — results determine system sizing and whether a softener alone is enough or you need a combination unit.
Softener Sizing & Install
Correctly-sized ion-exchange softeners from brands we trust (Fleck, Clack, Pentair). Installed at the main supply with a bypass — code-compliant, permitted, and insurable.
Whole-Home Carbon Filtration
Catalytic carbon filters remove chlorine and chloramines before they hit your softener (which they can damage). Also takes out taste/odor compounds common in LA water.
Reverse Osmosis (Kitchen)
For drinking water purity, under-sink RO systems reduce TDS (total dissolved solids) by 95%+. Installation typically includes a dedicated faucet and fridge-line supply.
Sediment Pre-Filters
For older SFV homes with galvanized supply or older main lines, sediment filtration ahead of the softener prevents resin fouling and extends system life.
Maintenance & Salt Service
Optional: annual system check, resin sanitize, and salt delivery for homeowners who don't want to carry 40-pound bags.
How It Works
- Call us. A real person answers — no call center, no voicemail.
- We diagnose free. Onsite assessment with upfront quote before any work starts.
- We fix it right. Permits where required, clean work, two-year labor warranty.
- We follow up. Quick check-in after any significant job to make sure it's holding.
Cities We Serve
We deliver this service across the San Fernando Valley and Greater LA. Closest response:
Frequently Asked Questions
Do I really need a water softener in LA?
If you own the home long-term: almost certainly yes. Without one, your next water heater will fail in 7–9 years instead of 12+, your dishwasher in 6–8 instead of 10+, and you'll replace faucet cartridges every 2–3 years.
Aren't water softeners banned in California?
Partial bans exist in some Inland Empire and Central Valley jurisdictions that are stressed on sewer sodium. LA County currently permits residential softeners. We confirm local rules before installing.
What's the difference between filtration and softening?
Filtration removes contaminants (chlorine, sediment, particles). Softening removes hardness minerals (calcium, magnesium). They solve different problems — and most LA homes benefit from both.
How much does a whole-home softener cost installed?
Quality residential softener installed with bypass, pressure test, and permit: $2,200–$3,400. Combination softener + carbon filter system: $3,200–$4,800. Lifetime-of-house operating cost is mostly just salt (~$100–$150/year).
Can I use my existing water heater with a new softener?
Yes, and you should — soft water flushes out sediment and dramatically extends water heater life going forward. Combine it with an anode rod change on an older unit.
Ready to Get It Fixed?
Call us now or send a message — we respond in minutes, not hours.